SUNCONTROL2 is the latest and most innovative charge controller for solar modules from Dometic NDS, with separate inputs for two solar panels. State-of-the-art MPPT technology (Maximum Power Point Track) allows you to get up to 30% more energy from your solar panels. The N-BUS protocol allows you to manage SUNCONTROL2 and all other N-BUS devices via a single controller or the NDS mobile app.
More energy from your solar panel with MPPT technology (Maximum Power Point Track)
OPTICHARGE algorithm optimises charging according to battery needs
Allows the use of the NDS App
Performs the most modern charging curves, even for LiFePO4 batteries
Charge controller with separate inputs for two solar panels
Allows you to manage and update all on-board devices from a single controller
Selector for lithium LiFePO4, AGM, gel and wet batteries
9620008150
SCE320B
n/a
Solar charger, Fuse, mounting screws, Operation- and Installation manual
Solar panel charge controller, up to 320 W, Bluetooth model
151
48
90
0.30
12
12
20
LeadLithium Iron Phosphate (LiFePO<sub>4</sub>)
-20
50
Black
ECE R10UKCACE
8058093763076
165
55
100
0.38
Allows you to manage and update all on-board devices from a single controller
MPPT is the algorithm that allows you to always exploit the “Maximum Power Point Track” supplied by the panel. A charge regulator with MPPT technology (e.g., the Dometic NDS SUNCONTROL2 charge controllers) can achieve up to 25% more efficiency than a conventional controller with PWM technology. An MPPT regulator is ideal where space is limited, because in less space you get more energy!
The NDS N-BUS was developed to create a practical and functional network between energy management devices. The CI-BUS compatible system enables all devices in the NDS network to communicate with each other via a standard data cable. This type of connection allows for a continuous exchange of information between devices of different kinds connected together (Battery, DC-DC, Solar regulator, etc.) It makes the on-board energy system more efficient and safer: All devices in the network can be managed from a single controller. You can use a display or the NDS Mobile App (if there is at least one N-BUS and Bluetooth device in the network).